Ever increasing price of electricity, demands a probe into energy-efficient solutions, to curtail electricity bills. Maximum electricity consumption is witnessed in the summer season, mainly because of air conditioning.
High-pressure misting systems are the world’s most energy-efficient solutions for cooling & humidification. Here are some tips on how to effectively utilize misting systems to save electricity.
UTILIZING MISTING SYSTEM IN THE ABSENCE OF AC
Utilizing high-pressure misting systems for indoor cooling saves electricity up to 50 times compared to air conditioning.
Let us compare the running cost for using AC vs. misting system to cool 15,000 cubic feet indoor area.
Six AC units of 1.5 tons capacity will be required, which will expend electricity up to 6 kWh or 6 units/h approximately.
A 0.5 LPM high-pressure misting system will be required, which will expend electricity up to approximately 0.12 kWh or 0.12 unit/h, approximately.
Thus the misting system will save electricity up to 5.88 kWh or units/h, which makes it 50 times.
The misting system’s impact on temperature reduction largely depends upon the air humidity. The lower the air humidity, the higher will be the temperature reduction For example, at RH 40-50% a reduction of 10C in temperature is expected.
A humidity controller must be installed for indoor installation to control excessive air moisture.
The only limitation of a misting system lies in its reduced ability (50%) to cool indoor locations during humid seasons i.e. July to September. While for the rest of the year, misting systems are truly stunning & economical.
Mist applications in the absence of AC are:
Hotel, residence, farmhouse, classroom, hostel, factory, mosque indoor area, shopping Plaza, office, bank, airport, hospital, clinic, cinema, canteen & marque etc.
UTILIZING MISTING SYSTEM WITH AC
A high-pressure misting system can be used in combination with AC, let’s dig out how.
Availability of both types of cooling solutions demands starting a misting system for the first 30 minutes without AC. Because these are capable of dropping temperature much quicker than AC, on the other hand, these expend 50 times less electricity. Instead of running AC at 38C, we are going to use it at 30C to save a lot of energy.
The AC should maintain temperature at 25C, while the misting system is still assisting it. This will help to cool the premises quickly & to control the negative impact of air conditioning. We know AC reduces air humidity, but this property is dangerous in the dry season. However the misting system will counter the issue with air humidification, so both are complementing each other to save 35% electricity while providing a refreshing environment, better cooling & increasing the service life of the AC. A humidity controller must be added for utilizing mist along the AC to control excessive air moisture.
Mist applications along the use of AC are:
Hotel, residence, farmhouse, classroom, hostel, factory, mosque indoor area, shopping Plaza, office, bank, airport, hospital, clinic, cinema, canteen & marque etc.
INSTALLING MISTING SYSTEM TO COOL AC OUTER UNITS
Imagine an AC outer unit working at 40C plus temperature compared to an AC outer unit working at 32C temperature. Which would cool better? The cooler one, right?
High-pressure misting systems are effective in cooling AC outer units. These do not cause wetting, the air entering the AC outer units is cooled to obtain the following benefits.
- Reduces head pressure
- Improves cooling efficiency by up to 30%
- Increases service life of AC
- Reduces electricity consumption
Drinking quality water with TDS below 300 ppm is a prerequisite for high-pressure misting systems.
Remember! Mid-pressure & low-pressure misting systems cannot be applied to indoor cooling &AC outer unit cooling. Because these may result in wetting & subsequently rusting. Always opt for high-pressure misting systems for hassle-free results.
Aves high-pressure misting systems consume electricity as little as:
0.25LPM/150 watts, 0.5LPM/180 watts, 1LPM/ 250 watts, 2LPM/500 watts, 4LPM/750 watts, 6LPM/ 1000 watts, 8LPM/1500 watts, 12LPM/ 2000 watts, 16LPM/3000 watts, 24LPM/4000 watts to cater the environmental needs of any industry or an individual.
We have vast experience in mist cooling & its application. Our solutions are comprehensive & energy efficient. One year warranty is offered for our products.
No one can beat us in quality-to-price ratio, skills & experience, and after-sale services.
